How to Choose Garden Grass GG20 Artificial Turf for Landscape Projects

  • Home
  • News
  • How to Choose Garden Grass GG20 Artificial Turf for Landscape Projects
How to Choose Garden Grass GG20 Artificial Turf for Landscape Projects

11 November 2026

Garden Grass GG20 Artificial Turf combines a 20 mm pile, PP and PE M-shaped yarn, 60 L/min/m² permeability, and 2 m or 4 m roll widths. Those specifications suit commercial landscaping, home gardens, and larger residential areas where you need a low-profile green surface with rapid drainage. This guide shows which project conditions to check before requesting a quotation.

Illustration: How to Choose Garden Grass GG20 Artificial Turf for Landscape Projects
Illustration for reference; see the product page for actual photos and specifications.
01

Project use and finished level: commercial landscaping, home gardens, and larger residential areas with a 20 mm pile and 23 mm total height

02

Yarn and appearance: PP plus PE M-shaped yarn with field green, apple green, olive green, and brown thatch

03

Drainage and backing: latex-backed drainage, 60 L/min/m² water permeability, PP composites and mesh backing, and 120 g/m² backing weight

04

Density and installation planning: 8,500 pile Dtex, 150 stitches/m, 15,750 stitches/m², at least 40 N tuft lock, and 2 m or 4 m roll widths

Start with the project surface and use

Garden Grass GG20 Artificial Turf fits landscape projects that need a 20 mm pile and a year-round green appearance. We supply it for commercial landscaping, home gardens, and large residential areas. The pile height gives you a lower-profile surface than taller landscape turf, so it is a practical choice when the finished level, edging detail, or door threshold matters.

Picture a residential garden where the surface must remain visually consistent across the season. GG20 combines field green, apple green, and olive green blades with natural brown thatch, creating variation across the surface instead of a single flat color. For a commercial landscape, use the same specification when the project calls for a consistent appearance across multiple rolls and the installation area needs rapid water passage.

The main decision is whether your site needs this pile height and construction. Measure the finished build-up around paving, drainage falls, borders, and thresholds before ordering. The product has a 20 mm pile and a 23 mm total height, so both figures matter when you plan the edge detail.

Match the construction to the buying criteria

Pile height and finished level

GG20 has a 20 mm pile height and a 23 mm total height. The pile is the visible blade height, while the total height includes the backing construction. Use the 20 mm figure when you are comparing the visual profile of the grass, and use 23 mm when checking the complete surface build-up against adjoining materials.

This makes GG20 suitable for a buyer who wants a defined, relatively low landscape profile without selecting a taller 40 mm or 45 mm product. For a garden path edge, courtyard, terrace border, or commercial planting zone, check the transition from the turf to concrete, stone, or soil at the design stage.

Yarn composition and appearance

The yarn composition is PP plus PE, formed in an M shape. The color blend uses field green, apple green, and olive green, with brown thatch. Together, these details give the surface a mixed green appearance with visible thatch near the base of the blades.

Choose this construction when the finished project needs a natural-looking landscape surface rather than a single-color green. We can use the color combination across home gardens and commercial areas where the turf must sit beside planting, paving, or other outdoor finishes. Send the planned area and surrounding colors with your quotation request if visual matching across a project matters.

Density and retention

The product has a pile Dtex of 8,500, a stitch rate of 150 stitches per meter, and a total density of 15,750 stitches per square meter. Its backing uses PP composites and mesh, with a backing weight of 120 g/m². Tuft lock is at least 40 N.

These figures give you several checks for a specification review. Dtex describes the yarn thickness, stitch rate describes how frequently the yarn is inserted along the length, and total density describes the number of stitches across a square meter. The backing construction and tuft lock value are relevant when you are planning handling, cutting, joining, and fixing during installation.

For a larger residential area or commercial landscape, calculate the total square meters first, then confirm how the roll layout will place seams and offcuts. A clear layout helps you keep the color direction consistent and reduces avoidable waste.

Drainage requirement

GG20 has a latex-backed drainage system and a water permeability of 60 L/min/m². Select it when rainwater needs to pass through the turf rather than remain on the visible surface. The drainage result still depends on the prepared base and the site's falls, so plan the sub-base and outlet route as part of the installation rather than treating the turf as the complete drainage design.

For a garden after rainfall, picture water moving through the latex-backed surface toward the prepared drainage layer. Before ordering, inspect the area for low points and confirm that the base can receive and carry water. We provide professional installation guides to help plan for drainage efficiency.

Plan the roll format before ordering

GG20 is tracked in 2 m and 4 m roll widths. Width selection affects the number of seams, the cutting plan, and the way the rolls move through the site. A 2 m roll may suit narrower garden sections or access routes, while a 4 m roll can reduce seams across a broad open area. Choose only after measuring the installation route, doorway clearances, turning points, and the final layout.

For a commercial landscaping project, draw the area as simple rectangles where possible and mark fixed features such as trees, beds, posts, and drainage covers. For a home garden, measure the narrowest access point before selecting the roll width. Send us the site dimensions, access measurements, desired roll width, and total quantity so we can review the layout with you.

GG20 also has batch-management support for consistent color matching across different production batches. If one project will be ordered in stages, provide the full project reference and planned quantities when you request a quotation. That gives us the information needed to coordinate the product requirement across the order.

Questions to settle before the quote

What height should be used in the edge detail?

Use 23 mm for the complete turf build-up and 20 mm for the visible pile. The difference matters where GG20 meets paving, stone, drainage channels, or door thresholds. Draw the adjoining finished levels and show the turf build-up on the detail. We can then review the required quantity and roll layout against the 20 mm pile and 23 mm total height.

Is GG20 made from one plastic material?

No. GG20 uses a PP and PE yarn composition, with an M-shaped yarn profile. The backing is PP composites and mesh, and the backing weight is 120 g/m². Include these construction details in your purchase specification so the quoted product matches the intended GG20 configuration, especially when a project includes several landscape materials.

Which roll width should a narrow garden use?

A 2 m width is the relevant format to examine first for a narrow garden, but the access route decides whether the roll can reach the installation area. Measure the narrowest doorway, gate, corridor, and turning point, then send those dimensions with the garden plan. We also track 4 m rolls for broader layouts where the site can receive them.

What should be checked for a drainage-led installation?

Check the prepared base, the direction of water flow, and the outlet route before placing the order. GG20 has 60 L/min/m² water permeability through its latex-backed drainage system, but the surrounding base must still carry water away. Mark low points and drainage covers on the plan, then send the drawing so we can review roll placement and installation guidance.

Select the specification and send the site plan

Choose Garden Grass GG20 Artificial Turf when your landscape project needs a 20 mm pile, 23 mm total height, PP and PE M-shaped yarn, rapid permeability, and 2 m or 4 m roll planning. Send the site dimensions, access widths, finished edge levels, roll preference, color direction, and required quantity for a quotation.

The company

Hebei Xiongyi Rubber & Plastic Products Co., Ltd.

HEBEI XIONGYI RUBBER & PLASTIC PRODUCTS CO., LTD. ("XY Grass") is a Chinese manufacturer and exporter of artificial grass, offering a comprehensive range of products including landscaping grass, sports grass, carpet grass, and green walls (vertical grass). XY Grass is dedicated to the R&D and production of artificial turf, utilizing the industry’s latest technologies and establishing regional industrial alliances to achieve resource sharing.As one of China’s few integrated artificial grass specialists, XY Grass…

About Us ↗Visit company website ↗

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.